The unit is designed for installation in din boxes. It has 4 relays steering the receivers 230VAC (5A) or 30VDC (5A). Unit has a set of interfaces allowing the system to communicate with external enviroment, interract, and register parameters. Possible wireless communication (Zee) or wired (Wee). Unit can be powered from Wee line. 4 leds show state of relays.

• Size - 1DIN (T:90mm x W:17.5mm x D:65mm)
• Type - 4 Relay unit
• Connection type - WIRE/ WIRELESS
• Actors - 4 INDEPENDENT LINES
• Load - 230VAC/5A
• connectors - OUT1, OUT2, OUT3, OUT4, IN
• interfaces - Wee (2x side connecttions); 1Wire, I2C (Front connection)

The unit is designed for Installation in din boxes. It has 8 relays steering the receivers 230VAC (5A) or 30VDC (5A), can measure AC receiver current. Unit has a set of interfaces allowing the system to communicate with external enviroment, interract, and register parameters, including 4 x 0-10V analogue control receivers / sensors (depending on the configuration of the input / output). Possible wireless communication (Zee) or wired (Wee). Unit can be powered from Wee line. 4 leds show state of relays.

Parameters:

• Size: 2DIN (T:90mm x W:35mm x D:65mm)
• Weight: 80g (without battery)
• Power: direct from 115/230 VAC line or 5/12VDC Wee line, consumptiom max 520mW
• Working temperature: -20°C ~ 50°C
• Connectors: OUT1 - OUT8, IN1, IN2
• Load: 8x5A each inependent line, 230VAC max total 10A

The unit is designed for control the LED light. It can control RGB light or 3 independent lights (single channel) 12/24VDC. It continuously measures the voltage and current (power) of light. Unit has a set of interfaces allowing the system to communicate with external enviroment, interract, and register parameters.Possible wireless communication (Zee) or wired (Wee). Unit can be powered from Wee line, or directly from 12/24VDC line. This unit is also known as Light Scenarios Controller. Unit is extremally small, does not require externall power.

Parameters:

• Size: W:36mm x H:16mm x D:60mm
• Weight: g
• Power: direct from 12/24Vdc power line or 5/12vdc Wee line
• Working temperature: -20°C ~ 50°C
• Load: max 8A each channel, max 12A total; 12/24VDC
• N version of device is dedicated for Common Ground devices.

The unit is designed for control the LED light. It can control RGB light or 3 independent lights (single channel) 12/24VDC. It continuously measures the voltage and current (power) of light. Unit has a set of interfaces allowing the system to communicate with external enviroment, interract, and register parameters.Possible wireless communication (Zee) or wired (Wee). Unit can be powered from Wee line, or directly from 12/24VDC line. This unit is also known as Light Scenarios Controller. Unit is extremally small, does not require externall power.

Parameters:

• Size: W:36mm x H:16mm x D:60mm
• Weight: g
• Power: direct from 12/24Vdc power line or 5/12vdc Wee line
• Working temperature: -20°C ~ 50°C
• Load: max 8A each channel, max 12A total; 12/24VDC
• P version of device is dedicated for Common Power line devices.

Special unit dedicated to control Thermoelectrical valves and sprinklers, or other devices (230VAC or 30VDC). Unit has 8 relays (semiconductor or mechanical customizable) steering 8 independent lines, or 4 up/down lines. Unit is equipped with interfaces to communicate, interact, or register of external enviroment. It can communicate via wireless (Zee) or wire line (Wee). Unit is powered from Wee line, or direct from 230VAC line. There are 2 optoisolated counters, and the 2 analog thermometers ports with smooth current characteristic (can sense: Pt100, Pt500, Pt1000)

It is dedicated as Thermoregulator device, Sprinkler controler, or unit to control automation actors.

Parameters:

• size: W:200mm x H:28mm x D:98mm
• powered from 115/230 VAC line or 5/12VDC Wee line
• max circuit load 5A/230VAC max 1250VA, total max 10A (2000VA)